SA88 Flowing agent for powder coatings

Leveling agent are additives for paint and inks to proper flow out and wetting to resin, pigment & fillers. Anti-cratering performance can be added by cross-contaminations.Kabasph leveling Agents are well known in the world for its reliable performance as a flow control agent for general industrial powder coatings. They are well suited for the spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics.

1. Description:

Leveling agent are additives for paint and inks to proper flow out and wetting to resin, pigment & fillers. Anti-cratering performance can be added by cross-contaminations.

Kabasph leveling Agents are well known in the world for its reliable performance as a flow control agent for general industrial powder coatings. They are well suited for the spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics.

SA88 is a flow agent which can be used for any powder coating system such as EP.PES/EP hybrid, PES/TGIC.PES/Primid and PU etc .

2. Typical properties:

Appearance White Powder [visual]

Melting range (℃) ≥65

Specific gravity (g/cm3) ≤0.5 [GB1725]

Herein described to be typical properties and do not constitute specification limits.

3. Characteristics:

Applicable to various powder paint, the overall situation is good, easy to control

Promoting flow flat, significant effect .

Enhance the powder loosening, enhancing the rate of powder.

4. Type specification:

Functional Level agent
Model	Application	Processing&Use level	Characteristics
SA88	Leveling agent	Premix&extrusion 0.5-1.5% by weight of total formula	Eliminate surface defects High suitability and reliable performance
K7572	Leveling agent	Premix&extrusion 0.6-1.5% by weight of total formula	Significantly improve the melt fluidity of the system, prevent coating defects such as pits, pinholes and fisheye, and the coating has excellent leveling and saturation.
K7573	Leveling agent	Premix&extrusion 0.6-1.5% by weight of total formula	Prevents coating defects such as pits, pinholes and fisheye, and has excellent interlayer adhesion and recoating performance.
K7567	Leveling agent	Premix&extrusion 0.6-1.5% by weight of total formula	Prevents coating defects such as pits, pinholes, fisheye, etc. The coating has excellent leveling property, weatherability and good compatibility.
K7579	Leveling agent	Premix&extrusion 0.6-1.5% by weight of total formula	Excellent leveling, eliminating film printing, not affecting interlayer adhesion, not affecting surface printing or gluing.